| |
 |
| |
New Ceramic HELITURN Inserts with a Molded Chipformer
ISCAR is introducing new HELITURN LNMX 1506..R/L-HT IS8 ceramic inserts with a molded chipformer.
The new inserts combine the advantage of the HELITURN
tangentially clamped insert system with the ceramic grade and a sophisticated molded chipformer. The tangential clamping is most important when using ceramic inserts, as by means of this method bending forces are practically eliminated from being exerted on the insert. The new insert can be used for high speed machining
(500-1000 m/min) of cast iron. The LNMX 1506..R/L-HT IS8 insert
is the ultimate solution for Fast Metal Removal when machining disk brakes, flanges, valves and other mass production parts made from cast iron.
|
|