X
ISO TURN
NPA 23/2018
ISCAR’s Innovative New Double Sided Positive Inserts
Highlights
ISCAR introduces new double-sided inserts with 4 unique cutting
edges as an advantageous alternative to the conventional ISO
standard positive inserts with 2 cutting edges.
The new double-sided VNGU, CNGX, CNGG and CXMG inserts operate similarly to positive inserts with the same corner angles, providing an added advantage of double cutting edges.
ALUPTURN
Designed mainly for machining aluminum wheels, VNGU 2206..-R3N are 35° double-sided rhombic inserts with a very positive rake angle and sharp cutting edge.
Standard VCGT with 2 cutting edges
New VNGU 2206..-R3N with 4 cutting edges
Insert Features
Extremely positive rake angle and polished rake face providing soft cut
Eliminates built-up-edge
Low cutting forces
Designed mainly for machining aluminum wheels
Tool Features
Screw clamped inserts
Very effective coolant nozzles directed to the cutting edge
Tool turning angles designed mainly for machining aluminum wheels
CNGG and CNGX
Double-sided inserts represent an economical solution for aluminum. The new CNGG and CNGX inserts feature 4 cutting edges; they can replace the standard CCGT that feature only 2 cutting edges. Both inserts feature positive rake angles that provide soft cut and low cutting forces to eliminate built-up-edge.
Conventional CCGT
NEW CNGX
NEW CNGG
Note:The new inserts are clamped on standard FLASHTURN tools
LOGIQ4TURN
Standard CCMT with 2 cutting edges
New CXMG with 4 cutting edges
Insert Features
The new double-sided CXMG inserts operate similarly to CCMT positive inserts and can therefore replace standard CCMT inserts. In some applications, they can also replace standard negative CNMG inserts. Double-sided with a positive flank Low cutting forces Designed with a chipformer for general turning applications
Tool Features
Lever lock insert clamping system Very effective JHP (Jet High Pressure) coolant nozzles directed to the cutting edge for increased tool life, improved chip control and high productivity The positive insert flank enables a dove-tailed pocket design for very firm insert clamping
Dove Tail
Note:JHP (Jet High Pressure) tools provide advantageous performance also when conventional pressure is applied through the coolant system
CNGG-F3N
Double-Sided Sharp-Edged Positive and Polished Rake Inserts
for Finishing on Aluminum and Other Non-Ferrous Materials
Double-Sided Sharp-Edged Positive and Polished Rake Inserts
for Finishing on Aluminum and Other Non-Ferrous Materials
CNGX-M3N
Double-Sided Positive Rake Inserts with High Helical and Sharp Edge
for Medium Machining on Non-Ferrous Materials
Double-Sided Positive Rake Inserts with High Helical and Sharp Edge
for Medium Machining on Non-Ferrous Materials
VNGU-R3N
Double-Sided Sharp-Edged Positive Rake Inserts for Rough Machining on Aluminum
and Other Non-Ferrous Materials
Double-Sided Sharp-Edged Positive Rake Inserts for Rough Machining on Aluminum
and Other Non-Ferrous Materials
A-SVQNR/L-AL-JHP
Screw Lock Boring Bars Carrying the 35° Rhombic Inserts
Screw Lock Boring Bars Carrying the 35° Rhombic Inserts
SVHNR/L-JHP
Screw Lock Tools with Channels for High Pressure
Coolant Carrying 35° Rhombic Inserts
Screw Lock Tools with Channels for High Pressure
Coolant Carrying 35° Rhombic Inserts
CXMG-F3P
80° Double-Sided and Double-Positive Inserts with a
Positive Rake for Finishing on Alloyed Steel
80° Double-Sided and Double-Positive Inserts with a
Positive Rake for Finishing on Alloyed Steel
CXMG-M3P
80° Double-Sided and Double-Positive Inserts with a Positive Rake for Medium
Machining on Alloyed Steel
80° Double-Sided and Double-Positive Inserts with a Positive Rake for Medium
Machining on Alloyed Steel
CXMG-F3M
80° Double-Sided and Double-Positive Inserts with a Positive Rake
for Finishing on Stainless Steel and H.T.A.
80° Double-Sided and Double-Positive Inserts with a Positive Rake
for Finishing on Stainless Steel and H.T.A.
CXMG-M3M
80° Double-Sided and Double-Positive Inserts with a Positive Rake
for Medium Machining on Stainless Steel and H.T.A.
80° Double-Sided and Double-Positive Inserts with a Positive Rake
for Medium Machining on Stainless Steel and H.T.A.
A-PCLXR/L
Lever Lock Boring Bars Carrying the Negative CNMX/CNMG 80° Rhombic Inserts
Lever Lock Boring Bars Carrying the Negative CNMX/CNMG 80° Rhombic Inserts
PCLXR/L-JHP
Lever Lock Tools with Channels for High Pressure Coolant
Carrying the CXMG 80° Rhombic Inserts
Lever Lock Tools with Channels for High Pressure Coolant
Carrying the CXMG 80° Rhombic Inserts
PCLXR/L
Lever Lock Tools Carrying the CXMG 80° Rhombic Inserts
Lever Lock Tools Carrying the CXMG 80° Rhombic Inserts
The NPA23-2018's pdf file: View (PDF) or Download (ZIP)
About Us
Overview Founders Ethics Code Research & Development Production Quality Assurance Global Company REACH Global Policy Conflict Minerals ISCAR SeminarsProduct Lines
Parting & Grooving Turning Miniature Hole Making Milling Toolholding Threading Microtools Division Grades Insert WearCompany
Contact Us Terms of Use and Legal Disclaimer Privacy Statement YouTube Terms of Service Meta Quest Privacy Data PoliciesNews & Publications
New Product Announcements Catalogs Brochures Reference and User Guides Latest Articles ISCAR World MagazineISCAR Sustainability
ISCAR Sustainability Main Production and Environment R&D at ISCAR Social Engagement Customer and Delivery Sustainability VideoDownload ISCAR World App
