Page 22 - Demo

ISCARSQUARE SHOULDER ENDMILLS 20DC DCONMSAPMXLF FHA (46-48%u00b0)THSZMSa1%u00b0a4%u00b0a2%u00b0a3%u00b0a1%u2260a2%u2260a3%u2260a4CHWx45%u00b0Dimensions RecommendedMachining DataDesignation DC NOF(1) APMX THSZMS DCONMS LF CSP(2) CHW KCH IC908fz(mm/t)MM EC080H05C3-4T05CF 8.00 4 5.00 T05 7.70 10.00 0 0.30 45.0 %u2022 0.03-0.09MM EC100H07C4-4T06CF 10.00 4 7.00 T06 9.60 13.00 0 0.40 45.0 %u2022 0.03-0.10MM EC120H09C5-4T08CF 12.00 4 9.00 T08 11.70 16.50 0 0.50 45.0 %u2022 0.04-0.11MM EC160H12C6-4T10CF 16.00 4 12.00 T10 15.30 20.50 0 0.60 45.0 %u2022 0.05-0.13MM EC200H15C6-4T12CF 20.00 4 15.00 T12 18.45 25.50 0 0.60 45.0 %u2022 0.05-0.17%u2022 For shanks, see pages 90-98 %u2022 For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 11-12 %u2022 Do not apply lubricant to the threaded connection %u2022 For user guide, see pages 13-14(1) Number of flutes (2) 0 - Without coolant supply, 1 - With coolant supply MM EC-H-4-CFInterchangeable Carbide Endmill Heads for CHATTER-FREE Milling Alloyed SteelDCe8 DCONMSAPMXLFCHWx45%u00b0 FHA (35 - 41%u00b0)THSZMSa1%u00b0a5%u00b0a3%u00b0a2%u00b0a4%u00b0a1%u2260a2%u2260a3%u2260a4%u2260a5Rd%u00b0Dimensions RecommendedMachining DataDesignation DC NOF(1) APMX THSZMS DCONMS LF RMPX%u00b0(2) CSP(3) CHW KCH IC908fz(mm/t)MM EC080H05C3-5T05CF 8.00 5 5.00 T05 7.70 10.00 5.0 0 0.30 45.0 %u2022 0.03-0.09MM EC100H07C4-5T06CF 10.00 5 7.00 T06 9.60 13.00 5.0 0 0.40 45.0 %u2022 0.03-0.10MM EC120H09C5-5T08CF 12.00 5 9.00 T08 11.70 16.50 4.0 0 0.50 45.0 %u2022 0.04-0.11MM EC160H12C6-5T10CF 16.00 5 12.00 T10 15.30 20.50 4.0 0 0.60 45.0 %u2022 0.05-0.13MM EC200H15C6-5T12CF 20.00 5 15.00 T12 18.45 25.50 3.0 0 0.60 45.0 %u2022 0.05-0.17MM EC250H22C6-5T15CF 25.00 5 22.00 T15 23.90 37.00 3.0 0 0.60 45.0 %u2022 0.06-0.17%u2022 For shanks, see pages 90-98 %u2022 For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 11-12 %u2022 Do not apply lubricant to the threaded connection %u2022 For user guide, see pages 13-14(1) Number of flutes (2) Maximum ramping angle (3) 0 - Without coolant supply, 1 - With coolant supply MM EC-H-5-CFInterchangeable Carbide Endmill Heads for CHATTER-FREE Milling of High Temperature Alloys such as Titanium and Inconel