Page 11 - NewProductsCatalogVersion_5_LR
P. 11
CXMG-F3P IC 95º 95º
80° Double-Sided and Double- S 95º
Positive Inserts with a Positive
Rake for Finishing on Alloyed Steel L Tough 1 Hard
RE
RE
0.20 • •
Dimensions 0.40 • Recommended Machining Data
0.40 •
Designation L IC S 0.80 •IC8150 ap f
10.40 9.70 4.66 IC807 (mm) (mm/rev)
CXMG 090402-F3P 10.40 9.70 4.65
CXMG 090404-F3P 13.83 12.50 5.80 0.30-2.00 0.03-0.15
CXMG 12T504-F3P 13.75 12.50 5.80 0.40-2.00 0.05-0.25
CXMG 12T508-F3P 0.40-2.00 0.05-0.25
0.80-2.00 0.05-0.25
CXMG-M3P IC 95º 95º
80° Double-Sided and S 95º
Double-Positive Inserts with
a Positive Rake for Medium L
Machining on Alloyed Steel RE
Dimensions Tough 1 Hard Recommended Machining Data
IC8250
IC8150
Designation L IC S ap f
10.32 9.70 4.65 RE (mm) (mm/rev)
CXMG 090408-M3P 13.75 12.50 5.80
CXMG 12T508-M3P 13.68 12.50 5.80 0.80 • 0.80-3.00 0.10-0.50
CXMG 12T512-M3P ••
0.80 •• 0.80-5.00 0.10-0.50
1.20 1.20-5.00 0.10-0.50
CXMG-F3M IC 95º 95º
80° Double-Sided and S 95º
Double-Positive Inserts with a
Positive Rake for Finishing on L
Stainless Steel and H.T.A. RE
Dimensions Tough 1 Hard Recommended Machining Data
Designation L S IC6025 ap f
10.40 4.65 IC806 (mm) (mm/rev)
CXMG 090404-F3M 13.83 5.80 IC807 0.40-2.00 0.05-0.25
CXMG 12T504-F3M 13.75 IC 5.80 RE 0.40-2.00 0.05-0.25
CXMG 12T508-F3M 9.70 0.80-2.00 0.05-0.25
12.50 0.40 •
12.50 0.40 • • • 95º 95º
0.80 • • • 95º
CXMG-M3M
80° Double-Sided and Double- L IC
Positive Inserts with a Positive RE S
Rake for Medium Machining
on Stainless Steel and H.T.A. Tough 1 Hard
Dimensions Recommended Machining Data
Designation L IC S RE IC6025 ap f
10.32 IC806 (mm) (mm/rev)
CXMG 090408-M3M 13.75 IC807
CXMG 12T508-M3M 13.68
CXMG 12T512-M3M 9.70 4.65 0.80 • 0.80-3.00 0.15-0.50
•••
12.50 5.80 0.80 ••• 0.80-5.00 0.15-0.50
12.50 5.80 1.20 1.20-5.00 0.15-0.50
9