Page 7 - notch_grip_2019

Imperial
INSL Measurements
INGT-R/L S
Precision, Double-Ended Flat
Top Deep Grooving Inserts
3˚ CDX
CW BW
RE Right-hand shown

Dimensions Recommended
Machining Data

IC807 f groove
Designation CW CWTOL (1) RE RETOL (2) CDX BW S INSL (IPR)
INGT3094R/L .094 .0010 .0075 .0025 .275 .195 .344 1.370 • .0020-.0031
INGT3125R/L .125 .0010 .0075 .0025 .437 .195 .344 1.370 • .0031-.0047
• DMIN according to related boring bar
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)

INSL
INF-RCB/LCB S
Precision, Double-Ended
Face Grooving Inserts CDX
with a Chipformer CW 3˚
BW
RE Right-hand shown

Dimensions Recommended
Machining Data

IC807 f face-groove
Designation CW CWTOL (1) RE RETOL (2) CDX DAXN (3) BW S INSL (IPR)
INF3125R/LCB .125 .0010 .0075 .0025 .180 .94 .195 .344 .890 • .0035-.0055
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter

INSL
INFD-RCB/LCB
Precision, Single-Ended S
Deep Face Grooving Inserts 3˚ CDX
with a Chipformer
CW BW
RE
Right-hand shown
Recommended
Dimensions
Machining Data

IC807 f face-groove
Designation CW CWTOL (1) RE RETOL (2) CDX DAXN (3) BW S INSL (IPR)
INFD3125R/LCB .125 .0010 .0075 .0025 .250 1.87 .195 .344 .990 • .0035-.0055
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter
For tools, see pages: A-FLER/L () • FLASR/L (20) • FLSR/L (19) • H-FLER (21) • HS-FLER (22)

7